AEROLAS™-WHITE

AeroLas-White


Marsh Brothers Aviation AeroLas™-White is an elastomer, designed for moderate bearing pressure applications as a metal-backed bushing in applications requiring up to 20 MPa (2900 psi). AeroLas™-White also has applications as rub strips and anti-chafing protection in sheet form. AeroLas™-White can be produced in sheets of any thickness down to 0.020 inch (0.508mm). AeroLas™-White sheets can then be cut to suit any application via CNC routing, knife, shears, punch cut, etc.

Features

  • Lower coefficient of friction (typically 0.10-0.20) compared to AeroLas™-Black
  • High abrasion resistance
  • High resistance to shock loading and vibration
  • Very good dry-run performance

Typical Applications

  • Anti-chafe pads/strips
  • Thickness down to 0.018in (0.4572mm). Thinner sheets can be wrapped or bonded to surface contour.

Please consult with a Marsh Brothers Aviation representative on which material will best meet the requirements of your application. Our materials fit a wide-range of custom applications to meet your requirements and challenges. Contact us today by completing the form below, email us at info@MarshBrothersAviation.com or by phone 1-800-263-6242.